4-color Hueforge Flash DC Comics Character
4-color Hueforge Flash DC Comics Character
Boost
19
43
20
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
7.6 h
1 plate
Open in Bambu Studio
Boost
19
43
20
3
69
42
Released
Description
If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Matte Dark Matte Dark Red Transmission Distance: 1.6
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA BambuLab White Transmission Distance: 9.6
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Matte Dark Matte Dark Red
At layer #15 (1.36mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.
Comment & Rating (20)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
ABSOLUTELY MY FAVORITE THING IVE 3D PRINTED. this came out even better than I thought it would.
2
Reply
Boosted
Print Profile
0.08mm layer, 2 walls, 100% infill
Absolutely fantastic!!! My kids love it. This has been my first hueforge print, and I am so impressed with the result. Thanks a lot for the design.
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Me encanto !!
0
Reply
Great work on this Model, Thank you, I made this for my nephew, and the frame was from this chap https://makerworld.com/en/models/56304#profileId-57896 (Modified it) Picture was printed on the X1C (230x230mm) frame on the voron 2.4 350 ( 260x260mm)
0
Reply
Boosted
Do you think that Bambu basic red pla will also work? one additional doubt, one has to manually change the filament at the layers you mention, right? I mean, it is no possible to configure in Bambu studio which color goes next, is this correct? thanks
The designer has replied
0
Reply
you can configure the order of colors in bambulab, but this specific design (HueForge) has to be printed in the color orders i mentioned.
The Basic Red from bambu is going to excelent for the Flash, it's gonna be a awesome print with that color!
Happy Printing!
1
Reply
Boosted
thanks, I’ll try to print it this weekend.
0
Reply
Boosted
hi, I was about to print it, but I noticed an issue with the seams. Is this supposed to look like this?
0
Reply
Boosted
Print Profile
0.08mm layer, 2 walls, 100% infill
Awesome!!
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
One of my favorite prints! The quality of it is insane and it didn't even take that much color.
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld