Gambit & Rogue

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 130.05x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Kingroon Red Transmission Distance: 4.2
    PLA BambuLab Matte Latte Brown Transmission Distance: 2
    PLA+ Sunlu Pure Yellow Transmission Distance: 5
    PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Red
    At layer #13 (1.12mm) swap to Latte Brown
    At layer #14 (1.2mm) swap to Pure Yellow

   At layer #15 (1.28mm) swap to White for the rest.