Charizard pokemon hueforge
Boost
15
28
3
Print Profile(2)
0.08mm layer, 1 walls, 100% infill
Designer
1.8 h
1 plate
0.08mm layer, 1 walls, 100% infill
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
15
28
3
0
40
10
Released
Description
Charizard huefroge
Two profiles provided, one for ams second for handchange.
Used colors as below, just swap colors on mentioned layer. You can play with your colors too!
Any feedback appreciated.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Tough Black Transmission Distance: 0.6
PLA PolyTerra Lava Red Transmission Distance: 1
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Lava Red
At layer #13 (1.12mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.
Comment & Rating (3)
All
Print Profile
0.08mm layer, 1 walls, 100% infill
base layer is too thin, it makes the upper portion kinda flimsy.
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
(Edited)
0
Reply
No more
License
This user content is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld