Fire Dancer

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Dancer:

I'm thrilled to introduce a new collection I am starting called 'The Dancer,' a collection of artwork that utilizes fire, water, smoke and so forth to create an illusion of fantastical dancers.

Fire Dancer

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133x200

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.4
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At height depth (0.96mm) swap to Red
    At height depth (1.36mm) swap to Yellow
    At height depth (1.76mm) swap to White for the rest.

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections