The violin and its bow can be printed in 3 steps

First the violin, then the archer's wand and finally the other elements. The other elements are in PLA silk.
The violin was printed directly with three colors. The red color in the photo is due to a filament change at the very end of printing. It was not intentional.

To make the bow you need to use the stick (Baguette.stl), the head (Tête.stl), the handle (Manche.stl) and two screws (screw.stl x2). The rope is not 3D printed. I used a TPU filament. We fit the head and the handle onto the stick. Then we cut a string or a filament with a length slightly greater than the distance between the head and the handle. We pass the string inside the screws then tie a knot at each end. We can then screw the head and the handle.

The handle is 40% filled (stronger), and the body is 15% filled (faster and lighter)

Video https://www.youtube.com/shorts/UTfNMVoRWdo