Mrs Potts (Beauty and the Beast) hueforge.
Can be done with color swap or AMS.
Don't forget the frame:
Frame for Mrs. Potts hueforge by dohara1985 - MakerWorld
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA+ IIID Max Fuchsia Transmission Distance: 8
PLA+ IIID Max Mystic Purple Transmission Distance: 6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Fuchsia
At layer #14 (1.2mm) swap to Mystic Purple
At layer #15 (1.28mm) swap to Marine Blue
At layer #18 (1.52mm) swap to White for the rest.
Please "Like", review, follow and upload make.
I spend a lot of time designing and allow it all to be used for free (including commercially).
If you'd like to help me out, below are the possible ways. Thank you in advance!
https://www.buymeacoffee.com/dohara1985o
Venmo: Dohara1985
Paypal: @Dohara1985