If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Basic Red Transmission Distance: 4.8
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA BambuLab White Transmission Distance: 9.6
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.