Made by using HueForge under Personal use License

Orchid flower 4-Color Painting pre sliced and ready to go.

Dimensions:

132mm x 200mm

If you need to scale down/up, make sure not to adjust the Z axis.

For Non-AMS, print will need to be stopped at each step and perform an manual color change.


Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5


In case you need to make changes, here are the layer heights for each color change used (Make changes to fit your colors at these layers):

Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #9 (0.8mm) swap to Dark Red
At layer #12 (1.04mm) swap to Jade White for the rest