Really enjoying Hueforge, and made this awesome Flareon Brilliant Stars card! As always, I had to use a little artistic license on the colours, but I love how this one came out!!

Print details are below. This can be done with or without and AMS, just add a colour change at the layers listed below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Ziro Green Transmission Distance: 4.5
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Pure Yellow Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #9 (0.8mm) swap to Green
At layer #10 (0.88mm) swap to Blue
At layer #11 (0.96mm) swap to Red
At layer #12 (1.04mm) swap to Orange
At layer #15 (1.28mm) swap to Pure Yellow
At layer #16 (1.36mm) swap to White for the rest.