Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cobalt Blue
At layer #9 (0.8mm) swap to Purple
At layer #11 (0.96mm) swap to Gray
At layer #12 (1.04mm) swap to Lava Red
At layer #15 (1.28mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.

Note: Ensure a smooth transition during filament changes to avoid any artifacts in the print.

Additional Considerations:

• Make sure the printer is calibrated and leveled before starting the print.
• Use a reliable 3D printing material compatible with your printer.
• Adhere to proper print bed adhesion methods to prevent warping.
• Monitor the print closely during filament changes to ensure a seamless transition.
• Post-process the printed model as needed for a polished final result.

Happy 3D printing!