Fidget Clicking Wheel 2.0
Copyright Claim
Fidget Clicking Wheel 2.0
Boost
65
143
42
Print Profile(2)
![[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USba1bbd9ad6807d/design/2024-01-03_c86bb4afede69.jpg?image_process=resize,w_100/format,webp)
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
1 h
2 plates
0.2mm layer, 2 walls, 15% infill
33 min
1 plate
Boost
65
143
42
4
274
264
Released
Description
This toy is designed you get a click feeling sensation when you rotate the wheel. Cool appearance and good click feel!
Customizable click feeling and case design you can choose from:
- Two types of springs - Hard or Normal
- Three types of gear wheels - 40T, 28T or 20T (20T has half the click interval of 40T)
- Two types of case design - A or B
- My recommended choices are normal spring with 40T gear wheel.
Assembly:
Before assembling, fit each wheel into its respective casing and ensure smooth rotation. If the rotation feels stiff, use a file to trim it as necessary.
Finally, set the spring and make sure the wheel is engaged, then attach the opposite side of the case.
Comment & Rating (42)
All
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
Printed perfectly.
1
Reply
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
Really nice and stable design. I love mine and have it in my jacket every day
(Edited)
1
Reply
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
smooth print. works great.
1
Reply
Good stuff! Assembles easily and solidly.
1
Reply
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
great!
0
Reply
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
nice and fine
0
Reply
Boosted
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
Printed the wheel and spring using a 0.2 nozzle, then the case using 0.4. Both times using silk filament that I found laying around my house (after drying it for a few hours). The print still came out beautifully. I did very heavily modify the print profile (printed extremely slowly with a high temp to get the most shine out of the silk filament), so technically I didn't print using this profile, but the model is fantastic. If anyone is interested I'll upload my print profiles I used.
0
Reply
Boosted
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
prints extremely well, but it's a good idea to lower the speed to 50% for the spring piece
0
Reply
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
Tight tolerances, but nothing bad and worth it for how satisfying it clicks!
Thanks for sharing!
0
Reply
Print Profile
[1 main plate, options on 2]: 0.2mm layer, 2 walls, 15% infill
easy to assemble but wish there was more teach options for the wheal
The designer has replied
1
Reply
Good idea, I'll add a plate with the other options :)
(Edited)1
Reply
License
This work is licensed under a
Creative Commons Attribution-Share Alike
© 2024 MakerWorld