Cribbage Board Trophy - 120 Step, 2 & 3 Person! by Mr. Long Name

Mr. Long Name

Toys & Games>Board Games

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

32.6 h

4 plates

4.7(10)

Open in Bambu Studio

Boost

109

141

Released

Description

Race to the top to be the true Cribbage Champion of 2024!

***ADDED 3rd Hole Version and update 3mf file! 4-28-24***

Fair Warning, the one shown is the first version of the fancy model.

I modified it to get rid of the thin walls that caused my print failures seen in the photos!

The base designs, and the champion top require no supports, but the crown will.

Here are some of the features:
- Qty 2 x qty 120 1/8" Diameter, 3/8" deep holes.

- Each top has the 121st hole needed to win.

- Each base design has a pocket built into the base to store your pegs.

- In case you want to make a new topper, the hole on top is ½" wide x 3/8" long x and roughly 6" deep.

- Also, the inside space can be used to hold pegs if you remove the top.

Made in two parts to be able to print on smaller printers like the A1 Mini.

Let me know if there is a fix that is needed to make the game work better!

Comment & Rating (28)

@DietSpider

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

stunning print it’s beautiful, a third row would be amazing. I ran out of marble and had to switch to back up colors, but I believe it switched at the skunk line, which makes it a happy little accident.

The designer has replied

@Mr.LongName

@DietSpider, Thanks! I can add one pretty easily. I will reply again when I find the time to get it done!

@DietSpider

Boosted

thank you so much, I look forward to it, and possibly any creation you might have in the future

@Mr.LongName

Replying to @DietSpider :

Hey! Sorry for the major delay, but I just uploaded the 3-hole version for both styles. Check it out and let me know if there needs to be any changes!

@URdazed1

Love this print and the “twist” on a standard cribbage board. Printed well but when we went to use it to play a game the inside row especially was very difficult to get the pegs in and out. I know this is a “trophy” but we wanted it playable too. simple solution was to print it taller. Simply resized 20% taller in Bambu studio and now it’s perfect! Also remixed the top with a Dark Tower theme from Stephen King.

@drivinggun

Boosted

I Love it. It printed great, my Brother in law is in a league he is gifting it to them.

@TheRo0sTer

I'm trying to slice this in Orca and Cura and it won't pull g-code or create a model in either. What am I missing? This will be a great surprise to our monthly group. This going to be the most wins on the day trophy. If I can figure out what I'm missing.

The designer has replied

@Mr.LongName

Did you download the STL directly and import into those programs? It might be erroring out or just taking an extremely long time to create the g-code maybe. If you were having troubles getting the STL file, I can just send the STL file directly to you.

@Mr.LongName

I did update the .3mf file, and verified the stls that were uploaded, so you should be good to go!

@TheRo0sTer

Replying to @Mr.LongName :

I tried a few different things and Orca kept saying "Error: Relative Extruder addressing requires resetting the extruder position. Add G-code E0. If you don't mind sending me the STL for the crown topper and the fancy 2 hole, that would be great because I'd love to share it at our next Cribbage night. Thank you!

@mr.mepps

Hi @Mr.LongName this is a great model and I'm excited to print it! However, I'm not seeing the 3-hole version anywhere. Can you point me in the right direction?

The designer has replied