Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
45 min
1 plate
Open in Bambu Studio
Boost
5
3
5
0
39
31
Released
Description
This is a small and mostly effective cat Elizabethan collar or e-collar. This can be scaled to your printer but on a basic 256x256 print plate it's still fairly small. A real collar is probably in order if your cat has more trying injuries.
It kept my cat from pawing at the ointment I put on his head after he lost a brawl. It also made him switch into a “Imma stare at you angry like” mode.
The center neck hole has a diameter of 70mm.
Comment & Rating (5)
All
I increased the inner diameter (flat) from 100mm to 110mm for our slightly larger cat. I also used a pair of scissors to remove the inner corner below the studs after I realized it collided and prevented the studs from seating properly in the slots. He took it fairly well, I really think the increased inner size helped a lot.
I made another edit post-print to remove the part I cut away in a neater way. This should be an approximately 80mm* diameter cone: https://cad.onshape.com/documents/9cf60284299934b99c0b8c6f/w/6f3a17996fa6d00ace6fdda9/e/478c940de58b5d40455ce1f1?renderMode=0&;uiState=668171e97a133e4419664779
*(I haven't checked, I didn't measure it before putting it to use.)
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Fit my cat perfectly and the part printed just like it should, excellent model!
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld