🎯 Use your worn-out print plates for darts 🎯

What you'll need:

• An old print plate
• 3x 10mm or 12mm magnets
• Color spray paint
• Super glue and double-sided tape

How to:

1. Print Print Plate 1 and attach the dart stencil to the back with double-sided tape.
2. Fix it onto the old, discarded print plate using the adhesive tapes.
3. Spray over the entire plate and the printed stencil with a color spray of your choice.
4. Let it dry and then peel off the stencil - your dartboard is ready.
5. Attach the hanger at the top and use super glue to attach either standard 10mm or 12mm magnets into the appropriate darts, and you're set for 180s.

🎯 Good luck 🎯

cForms by Pl4C3b0