Needed one that allow thumb sticks, the hole for it is Ø16 and the distance is 100 mm. The Fusion 360 file is added so you can change it to your own need.
Printer:
Craftbot Plus
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm.
Infill:
20% Rectilinear
Filament: Innofill PLA White
Notes:
Temp. 215/60 celcius, 50 mm/sec. Nozzle 0.4 mm.
remove support
Used Fusion 360 to design it. First I made one stick protection then I copied it and made a bridge in between.