Joker Face
it's a very simple print that can be print-in-place, the model consists of two parts, they are printed separately, the first part is the base, the second is the face, then they are joined with a bit of glue.
if you use my 3mf file everything is indicated there and it is easy to print, if you decide not to use my file follow the instructions below.
Instructions for the base:
Swap Instructions for the hueforge base:
- Start with Black
- At layer #4 (0.48mm) swap to Purple
- At layer #11 (1.04mm) swap to Green
- At layer #15 (1.36) swap to Blue for the rest
Instruction for the Face:
print my colored file, or color it as you like. Then glue the two parts.
If re-scaling model make sure not to alter the Z height of the model
the face is taken from here https://www.printables.com/model/592112-joker-bust