Automatic Parking Disc

Automatic Parking Disc

Keep your parking time accurate without any manual adjustments! The Automatic 3D-Printed Parking Disc is designed to automatically update the displayed time using a precise clock mechanism. This smart solution ensures that your parking time is always accurate, giving you peace of mind while complying with parking regulations.

Installation Instructions:

1. Attach the Clock Mechanism:
   • Fasten the clock mechanism to the clock mechanism bracket using the center nut. This ensures a stable and reliable connection.
2. Assemble the Parking Disc:
   • Press fit the parking disc wheel onto the clock mechanism to secure it in place.
3. Mount the Bracket to the Disc Body:
   • Choose your preferred attachment method:
     • Magnetic Fixing: Insert four 4x2mm magnets into the designated slots for a quick and removable setup.
     • Magnet Substitute Parts: Use the 3D-printed alternatives and secure them with a small amount of superglue for a permanent fix.
4. Test and Adjust:
   • Set the desired time and observe the automatic adjustment to ensure smooth operation.

Component Information:

The Automatic 3D-Printed Parking Disc uses the reliable Clock Components Kit 011 and 4 pcs. D4x2mm round magnets - CA001 to ensure accurate timekeeping and secure mounting. Both components can be conveniently purchased from the Bambu Lab Maker’s Supply website.

Links to the components can be found in the description below.