OPEN Desk Cable Management Holder / Organizer by MBRS

MBRS

Household>Office

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

FIXED - 0.16mm layer, 3 walls, 11% infill

Designer

47 min

1 plate

4.7(177)

A1 Mini Ready - 0.16mm layer, 2 walls, 15% infill

1.2 h

1 plate

4.8(30)

Brim,Support,0.2mm layer, 3 walls, 10% infill

54 min

1 plate

4.9(15)

0.2mm layer, 3 walls, 10% infill

42 min

1 plate

5.0(1)

Click to see more

Boost

782

1763

254

1.9 k

Released

Description

I saw many people used my other creation, the standard desk cable holder, as a way to tidy up passing cables. Since I believe that model is not optimal for that use, I created this version which fits various sizes of cables and in bigger quantities.
It is also thinner which makes it ideal behind desks.
The size is universal and is compatible with desks up to 40 mm in thickness
(though if you have a thicker desk, nothing stops you from scaling Z a little bit).

Screw is now optimized and scaled 97.5% from the original model. Should fit nicely with a slight effort on first assembly.

Print is quick, about 40 mins, and only uses 18 g of plastic for both clamp and screw.
PLA resists fine for me, but you're free to try stronger materials.

Let me know if you like it!

(Supports in the print profile are very easy to remove, they can be removed in one pull.)

05/01/24 FIXED TOLERANCES

Comment & Rating (254)

@vit.shanel

Print Profile

0.2mm layer, 3 walls, 15% infill

The thread is not working, the clearence should be bigger...

The designer has replied

@AMB.Tech

Hi, thanks for the feedback. As I mentioned in the description, I modified the tolerances and tested, the part works now. Please try the new print profile and if it works let me know and change the rating! Thank you

(Edited)

@jpkdigital

Replying to @AMB.Tech :

Not OP but i just printed this and it came out great and works as expected.

(Edited)

@AMB.Tech

Replying to @jpkdigital :

awesome thank you!

@Jusque

Nice concept and model. However, like other commenters, the screw did not go into the hole (and confirmed it was scaled to 97.5%). Will be a nice model when it has a revision with a reliable mounting system.

The designer has replied

@AMB.Tech

hey thanks for the feedback! I’m working on this. So is it hard to insert or does it not even fit? did you print in regular pla? I will release an updated version in these days and get back to you

@Jusque

Replying to @AMB.Tech :

Yep, printed in generic PLA. In my case the screw doesn't even fit: it just starts to thread in but seizes after about 10degrees of rotation, about 1-2mm into its thread. Reducing the diameter further might help?

@brian.r.matthia

Same issue printed today with PLA.

@a.schmidt71

Print Profile

FIXED - 0.16mm layer, 3 walls, 11% infill

Alles Bestens, druck hat einwandfrei geklappt.

The designer has replied

@AMB.Tech

Danke!

@shanehoggatt

Print Profile

A1 Mini Ready - 0.16mm layer, 2 walls, 15% infill

nicee, thanks

@MarcusvanderLij

Print Profile

FIXED - 0.16mm layer, 3 walls, 11% infill

This is a great model, thanks for the upload! I tweaked profile a little to print cleaner on the A1 Mini. I've also uploaded the profile if it can help anyone else out. 1.2 hours but the final result is well worth the wait!