Snack Dispenser Remixed by Tarik77

Remixed by

Tarik77

Household>Other House Models

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

One Plate

Designer

3.3 h

1 plate

4.3(4)

Seperate Print Plates

Designer

4.5 h

4 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Update: Fixed the size of the lid!

Snack Dispenser

The Dispenser is fully printable! I would recommend using a real 20mm x 10mm spring because the printed one is a little too stiff. But as you can see in the gif it still works as intended! The Spring is already pre-supported so dont add supports!

PLEASE REMOVE THE SUPPORTS FROM THE SPRING! Check the second picture to see how it should look like.

REMINDER: When printing with PETG always use a textured plate or glue stick!

I would love to get some feedback and maybe even some improvements!

Filament that i use:

Tools that i use:

Deburring Tool https://amzn.to/3QFbhWC
Caliper https://amzn.to/44zqVZz
Cutters https://amzn.to/3UFRcR8
Pliers https://amzn.to/4bJXQNF
Sanding paper https://amzn.to/3wur57S
Isopropanol https://amzn.to/44GewmI
Silica gel https://amzn.to/4afvEkf
Soldering Inserts https://amzn.to/3wnzytA
Screws https://amzn.to/3wE9gTJ
Springs https://amzn.to/3KsK0mT
Primer https://amzn.to/3y7YHZx
Spray Paint https://amzn.to/3WGxXtp
Dremel https://amzn.to/3VlsxTs

If you like this project please check out my other ones aswell!

A like and a 5 Star review would help me out a lot.

If you enjoy my work feel free to boost the Model aswell! :)

Comment & Rating (21)

@mr_svzi

Print Profile

Seperate Print Plates

Updated after all the comments below: It finally works as expected. First I did something wrong printing wise, afterwards the model created fixed an issue I reported. That 5 star rating is very well deserved. Great job and thanks again!

(Edited)

The designer has replied

@Tarik77

Thank you for the constructive feedback. As mentioned in the description, I recommend using a real spring, as a printed one may not fully replace the desired functionality. That it doesn't work at all for you seems to be an exception, as it appears to function for me (as seen in my GIF) or for other users. I'll definitely adjust the lid size; thank you for bringing the issue to my attention. Honestly, I find a 1-star rating a bit harsh, but of course, that's up to you :)

@mr_svzi

Replying to @Tarik77 :

I don't want to sound harsh or rude, sorry for that. But how should I rate a print that is not useable for me because of the flaws? 🤔 I'm happy to print a new lid and give it another try with a real spring (need to check where I can purchase one, I don't want to purchase ten of those). And for sure I will update my rating afterwards. But right now, just from my own personal experience, I don't recommend printing it.

@Tarik77

@mr_svzi It's not about being rude or harsh, your question is completely valid. The print itself prints clean, without any structural flaws in the supports nor the components. The mechanism itself also should work with a normal spring. Thus, in my view, awarding it 1 star might be a bit exaggerated, but opinions can certainly differ. :) I'll fix the lid as soon as I can to ensure future users don't encounter similar issues. However, there's no need for you to go out of your way to purchase extra springs just to „give me another chance“. I appreciate your constructive feedback and will work on improving the lid, and if feasible, even the spring. Thank you for bringing this to my attention. edit: sorry,just a random thought - did you remove the supports off of the spring before trying to use it ?

(Edited)

@SchnakabuzSir

Print Profile

One Plate

nice and easy print. recommend to print it with Petg because of safety reasons

The designer has replied

@Tarik77

Thanks for the Rating! Yeah PETG is recommended for this type of print :) Can i ask why only 4 stars though?

@SchnakabuzSir

the Spring didnt work very well so i needed to buy one. the Rest is completely fine

@user_2267106542

Print Profile

One Plate

great, only the spring broke off

The designer has replied

@Tarik77

thanks for the rating! did you use petg for this model?

@Jonathan_Ruess

Print Profile

One Plate

Other Issues:Der Deckel hat bei mir leider einen zu kleinen Durchmesser und klemmt nicht auf dem Gehäuse, fällt bei umdrehen einfach ab.

The designer has replied

@Tarik77

Danke für das Feedback! tatsächlich hatte jemand anderes auch schon das Problem - leider hatte ich bisher keine Zeit es zu beheben. Ich denke aber nur den Deckel einzeln in 102,25% zu drucken sollte es beheben - sobald ich Zeit habe werde ich das ganze aber nochmal testen und hier nochmal berichten :)

@Jonathan_Ruess

Sehr gerne und danke für die schnelle Rückmeldung. Ich werde es mal probieren mit der Skalierung.

(Edited)