Chainsaw 1/10 by Zax852

Zax852

Hobby & DIY>RC

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 15% infill

6.8 h

1 plate

4.6(25)

0.16mm layer, 2 walls, 15% infill

1.2 h

2 plates

5.0(2)

Open in Bambu Studio

Boost

271

452

619

215

Released

Description

I made it from ABS and used acetone vapor. Some parts like front handle and brake have to be modified. It is intended as accessory for 1/10 expedition RC cars.

It is designed for fdm printers with 0,25 nozzle.

Model of transport box is here:

https://makerworld.com/en/models/119642

Comment & Rating (32)

@RH_Design

Print Profile

0.08mm layer, 2 walls, 15% infill

A very cool model The print also worked perfectly

Show original

@Jendapce

Print Profile

0.08mm layer, 2 walls, 15% infill

I guess I made a web. Hopefully it can be put together

@jimmy_the_c

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

love this model, I used it for elf on the shelf

@user_3850406497

It's an absolute outrage to upload something like this. Nothing fits together at all. The brake doesn't fit. The handle doesn't fit. If I could, I would give this model negative points

The designer has replied

Show original

@Zax852

Hello, the fact that handle and brake have to be modified to fit in is in the description. You just literally make two cuts and it is done. But if it is a problem, you can take those part from here: https://makerworld.com/en/models/477614

(Edited)

@user_3961074879

I am new to printing on a Bambu lab, so I didn't adjust the setting and it was a mess. had to reprint and adjust the setting.

The designer has replied

@Zax852

Hi, it is small, so some tweake is necessary. You will get best results with 0,2 nozzle.

@user_671930704

Print Profile

0.08mm layer, 2 walls, 15% infill

Printed perfectly, thank you very much

Show original

@fsu0888

I wish the model was double the size! It would make it easier to print and put together.

@Joshg

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

Perfect :)

@snoopy1492

Print Profile

0.08mm layer, 2 walls, 15% infill

Printed great. Do you have any direction on how to fix everything together ? Most notably the bar part ? It doesn't really fit snuggly in the hole made for it. I I might have overlooked something. btw you pictures show two part for the bar and the 3d model only has one but I guess you made some modification. thanks