The Planet Express - Futurama
Copyright Claim
The Planet Express - Futurama
Boost
813
1308
50
Print Profile(2)
0.1mm layer, 3 walls, 15% infill
Designer
9.6 h
1 plate
0.2mm layer, 3 walls, 15% infill
18.3 h
2 plates
Boost
813
1308
50
21
794
282
Released
Description
The Planet Express Ship - Futurama
1 : 100 Scale Model
Requires Minimal Support
Comment & Rating (50)
All
Boosted
Print Profile
0.1mm layer, 3 walls, 15% infill
Great print! I used Bambu Studio to colour it and rotated the body to use less filament. That caused some finish issues from the supports on the bottom but overall it turned awesome!
2
Reply
@Greenspin can you upload the print profile?
0
Reply
Boosted
Replying to @joaoasilva
I can try! The challenge is I had to put in some pauses in order to switch out filaments at different layers as I only have a single AMS. Not sure if it will work!
(Edited)1
Reply
Boosted
@greenspin Looks great! What filament colors (or green) did you use?
0
Reply
this thing has some problems its like some of the parts will not adjust to being used on a different printer the mount was fine the tail wing and hull but everything else seems to have g coding problems or something not sure what it is but when i set them into my resin printer slicer they work fine the engines problem moves around only in that layer cant get it to fully seal
The designer has replied
0
Reply
Yes, unfortunately this model was exclusively made with FDM printing in mind.
0
Reply
Replying to @maximdivirgilio
its having problems in fdm but not resin the two pics on the left is fdm the 1 on right is resin im probably going to do it all in resin but im out of resin and filament lol
(Edited)0
Reply
Replying to @GoblinForge
Oh, I see. I suggest seeing if there is an option for "Print Thin/Narrow Walls" or turning on Arachne slicing in Bambu.
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
a design and printing of 10
2
Reply
@Navibp3d can you upload the print profile?
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
qualità veramente ottima mio figlio è rimasto contentissimo nel giocarci....
(Edited)
2
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
fantastic print and went together easy. engine cone pin didnt fit but a little glue subbed nicely.
1
Reply
Boosted
Super cute print. Very happy :)
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 15% infill
Turned out great, My biggest multicolor so far.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
very nice
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Perfect match between model and wallpaper. Some parts are not entirely accurate, but overall it is a well made model
0
Reply
It turned out great! the only note is the pin for attaching the engine didn't really fit, but it was no big deal, a spot of glue works just fine.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld