Sad Spiderman :)
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Jade White for the rest.
ams version
There is also wider version https://makerworld.com/pl/models/126449#profileId-136652