hueforge trunks
Print Profile(1)
Description
Project: trunks.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.9mm
Filaments Used:
PLA 3dhojor matte black Transmission Distance: 0.6
PLA sunlu matte blue Transmission Distance: 1.5
PLA sunlu gray Transmission Distance: 1
PLA sunlu matte orange Transmission Distance: 3.9
PLA polyterra matte red Transmission Distance: 2.3
PLA 3dhojor magenta Transmission Distance: 3.5
PLA sunlu matte white Transmission Distance: 4.7
PLA duramic 3d matte purple Transmission Distance: 1.1
PLA esun matter marine blue Transmission Distance: 1.1
This print uses 9 unique filaments
Swap Instructions:
Start with matte black
At layer #7 (0.64mm) swap to matte blue
At layer #8 (0.72mm) swap to gray
At layer #10 (0.88mm) swap to matte orange
At layer #15 (1.28mm) swap to matte red
At layer #18 (1.52mm) swap to magenta
At layer #20 (1.68mm) swap to matte red
At layer #22 (1.84mm) swap to matte orange
At layer #26 (2.16mm) swap to matte white
At layer #30 (2.48mm) swap to matte purple
At layer #32 (2.64mm) swap to matter marine blue for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)