Wall Hook - Free 3D Print Model

Search models, users, collections, and posts

PB3D

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 25% infill

Designer

1.7 h

1 plate

5.0(190)

0.2mm layer, 6 walls, 25% infill

2.3 h

1 plate

4.9(38)

Scaled, ABS

2.2 h

1 plate

4.6(8)

Open in Bambu Studio

Boost

543

1636

261

162

2.9 k

2.1 k

Released

Description

There are many 3d printed hooks, this one is mine.

Use at least 3 walls ((4 used), I recommend cubic infill at at 15% or more (all in profile) which will print quicker than gyroid.

It was designed for a specific purpose (see lightweight ladder in pic) so is quite shallow. The base is 110mm tall with hole spacing of 91mm, and the load carrying part is 110mm deep. It can be used with 4-5mm or #8-10 screws.

I did some basic static analysis to balance the strength and material usage, image included. Mine is printed in Sunlu PLA+ and I wouldn't have a problem hanging 10kg on this (with safety) but it will take more.

Uploaded with the profile I used, for bed adhesion if you are printing an extra part, I rotated the second copy and nested it tight up to the first to share a common brim. I will update this to use sections that are multiples of line widths and maybe reduce that side chamfer to improve bed adhesion.

hook

fea