Straight line Deployment Markers
Print Profile(1)
Description
First foray into Tabletop gaming aids. Deployment markers for WH40K! Because setting up deployment zones with chopsticks ruins the aesthetic (it's what I used to do)
Measures 220mm length x 15mm deep x 5mm high.
Was originally printed on a Bambu Labs A1 with AMS feed with Bambu PLA Basic in Black, Blue and Grey.
Settings were as follows: .4mm nozzle, 12mm layer height, 2 walls, 15% infill.
Obviously requires no supports and they have been “Painted” using Bambu Slicers paint tool so you can swap up the colours as you desire or go all one colour if you don't have access to AMS.
I suspect I will get better results with the lettering and highlighted colour areas by going down to a .2mm nozzle and tighter layer height but currently have some large projects that are consuming bedtime.
Best colour combination I believe will be a grey or black as the primary with a stand-out colour like Red/Yellow used on the lettering and arrows.
Anyway, Enjoy.
Love the print?
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (26)