Animated version of Shree Ram.

Print at 25% infill with a layer height of 0.05mm with a base layer of 0.16mm

The Model is 159.83x200mm in size and 80x100mm (just scale the X and Y axis while keeping the Z axis values same as 159.83x200mm file)
You may print at higher layer heights below the Min Depth of 0.16mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.5
    PLA BambuLab Basic Blue Transmission Distance: 5.5
    PLA BambuLab Basic Jade White Transmission Distance: 4
    PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (0.81mm) swap to Blue
    At layer #18 (1.01mm) swap to Jade White
    At layer #34 (1.81mm) swap to Orange for the rest.