Harley Davidson Bar LED Sign - Double Sided
Copyright Claim
Harley Davidson Bar LED Sign - Double Sided
Boost
85
133
31
Print Profile(3)
0.2mm layer, 4 walls, 15% infill
Designer
2.8 h
1 plate
0.16mm layer, 3 walls, 15% infill
Designer
4.3 h
1 plate
0.16mm layer, 3 walls, 15% infill
54 min
1 plate
Open in Bambu Studio
Boost
85
133
31
4
199
226
Released
Description
LED Harley Davidson Bar sign, double sided. Make sure your bed is 100% clean before printing so artifacts don't reflect in the whites. The profile could use some more tweaking, but I was happy enough with the result. A bright white would also improve the quality. I was using poor lighting for the photo. LED channel inside the sign with a hollow post for running the cable. I will upload different styles of the light box itself at a later time, to allow for more display options.
*Update*
Another frame has been added for cleaner cable management for those not running wiring into a wall, etc.
Comment & Rating (31)
All
Boosted
Print Profile
0.16mm layer, 3 walls, 15% infill
I used your face plate on a different frame to maximize size.
Backlit with 1M 5 V USB 4000K Neutral white COB light.
Turned out great.
Thanks for the upload.
1
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 15% infill
Printed great. Can’t wait to wire this up and put it all together. Thanks Again!
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
The designer has replied
0
Reply
Looks great!!!!
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
(Edited)
0
Reply
Print looks amazing. wondering how to mount the skull piece to the arm?
The designer has replied
0
Reply
There's a small lip on the inside of the frame. The graphic print sits on the lip and is glued in.
1
Reply
Are you able to add a channel on the mounting arm to run the power cable down to a plug? It looks like it is totally flat and the cable would not be able to run down the mount.
The designer has replied
0
Reply
Can do. The idea was to have the cable run into the wall for a seamless look. I will adjust and upload tonight.
0
Reply
Boosted
Great print!
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 15% infill
Turned out great and the pieces fit PERFECTLY together. Very nice work!
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
cool piece!
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld