Installation Guide & Explanation

Presented below is a comprehensive guide outlining the installation process for the icon. Rest assured, the removal of the front cover window is a non-permanent modification, and you can effortlessly restore the window to its original position.

For the initial installation, though slightly more time-consuming, the process is straightforward and uncomplicated. Subsequent installations become notably easier and quicker.

First Installation Steps:

Remove Front Cover:
Gently detach the front cover from the printer.

Detach Original Extruder Icon:
Pull the original extruder icon away from the tool head in a straight motion.

Remove Window:
Press on the window from the outside to release it. A helpful tip is to simultaneously apply pressure to the inside clips (highlighted in red in the accompanying picture for this model) to facilitate the window's removal.

(Tip: You may find it easier to press on the inside clips marked in red on the model picture to ease the window removal process.)

Reinstall Front Cover:
Once the modifications are complete, reattach the front cover securely.

Install New Icon:
Insert the new icon through the opening where the window was situated, onto the metal rod that held the original icon. Ensure a snug fit to guarantee its stability.