Print Profile(1)
Bill of Materials
Description
Wall mounted clock. Uses a 56x56 clock mechanism. These can be purchased from eBay/Amazon/Aliexpress or from the Bambu Maker Supply store.
Also requires a 3mm thick perspex disc, 200mm in diameter, which is glued to the inside lip of the Outer_Frame.stl. The rear wall hanger is also glued to the frame. The Face_Plate.stl should be glued to the Base.stl, using the included align tool to help line it up correctly. 12 8mm bearings are also required, which are glued to the recesses on the front as an accent,
4 M3x10 hex bolts are required to attach the base plate to the outer frame.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)