Glasses Wall Mount Holder by CherrysCollection

CherrysCollection

Fashion>Glasses

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

V6 0.2mm layer, 3 walls, 10% infill

Designer

1.4 h

1 plate

4.9(40)

V7 With Holes 0.2mm layer, 3 walls, 10% infill

Designer

1.6 h

1 plate

4.8(22)

V5 0.2mm layer, 3 walls, 10% infill

Designer

1.4 h

1 plate

4.6(14)

A1_Mini V6

Designer

1.3 h

1 plate

5.0(7)

Boost

314

617

102

661

704

Released

Description

Update 3: Added a version that can be mounted to IKEA Skådis. It can be found on the following link.

https://makerworld.com/en/models/400690#profileId-302203

Update 2: Added a version with holes to attach with screws (V7)

Changes:

Countersunk holes added to attach with screws instead of 3M tape.
The back wall is 1mm thicker to compensate for the holes.

Update 1: Added a newer version (V6)

Changes:

The middle wall height has been increased by 4mm.
The fillets at the bottom of the model has been decreased to minimize overhangs.

Simple glasses mount for walls or cupboards. You can resize the model in the slicer to fit your glasses.

Open for comments and suggestions.

Comment & Rating (102)

@TLadd

Print Profile

V7 With Holes 0.2mm layer, 3 walls, 10% infill

Printer great everything fit awesome and its super functional.

(Edited)

The designer has replied

@CherrysC

Thats alot of prints. Happy that you liked it.

@CherrysC

I edited and used your picture for this model. Hope it is not an issue. let me know if there is one.

(Edited)

@TLadd

Replying to @CherrysC :

surely! Thanks for asking.

(Edited)

@Jusque

Nice model. A bit slim for wraparound glasses, but works well after expanding the depth to 60mm. Will use it to hold my safety glasses in the garage. The wall (to hold the glasses arms) could also be a little taller, at least for these glasses! Thanks!

(Edited)

The designer has replied

@CherrysC

Nice Print. I can make the center wall taller if you want that. How much taller should it be? By the way how was the bottom of the print? Any overhangs down there?

@Jusque

Replying to @CherrysC :

The centre wall is *just* okay for my glasses; another 5mm would have been perfect (acknowledging this might be less convenient for other glasses) Bottom of the print looks good to me! Pic for reference.

(Edited)

@CherrysC

Replying to @Jusque :

Perfect. I already uploaded a newer version with the center wall 4mm taller.

@brandonl.4231

Print Profile

V6 0.2mm layer, 3 walls, 10% infill

Easy print in sparkly PETG.

The designer has replied

@CherrysC

Wow, Thats neat. Good Job.

(Edited)

@AlexaMakesStuff

Print Profile

V6 0.2mm layer, 3 walls, 10% infill

Great print, messed up a bit but that was probably my fault, definitely gonna print some for my grandparents 👍

The designer has replied

@CherrysC

Nice. I am just about to upload a Glasses Holder Rack. Could be useful if you have more than 1 glasses.

(Edited)

@user_1880278934

Print Profile

V6 0.2mm layer, 3 walls, 10% infill

I printed two at a time, both came out awesome, string design that works well. I will say that for some glasses of they don't fit right way up, you may have to have them upside down.