Daredevil Season 2 Remixed by anony_rain

Remixed by

anony_rain

Props & Cosplays>Masks & Helmets

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

Reduced to .4 nozzle, 0.2mm layer, 4 walls, 15% infill

Designer

21.1 h

1 plate

4.8(11)

Painted, 0.2mm layer, 3 walls, 15% infill

39.5 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

101

183

Released

Description

Daredevil Season 2 mask by JMSProps on Thingiverse: https://www.thingiverse.com/thing:3738678, and is licensed under Creative Commons - Attribution - Non-Commercial

The original printing profile has been modified for a .4 nozzle on X1. I ran into issues with bed adhesion on the first print. This version has walls increased to 4, and support was added. For a cleaner print increase the min overhang.

Comment & Rating (15)

@darkice

Print Profile

Reduced to .4 nozzle, 0.2mm layer, 4 walls, 15% infill

Very nice model! Have done some black painting in BambuStudio to be like in the one seen in the Netflix serie. Around 41h print for the two color print. Hatchbox Iron Red PLA+ for the red. Bambu Black Basic PLA for the black.

@ThePrintingLab

Print Profile

Reduced to .4 nozzle, 0.2mm layer, 4 walls, 15% infill

nice file but the supports failed twice on the back of the mask. tried with 2 different printers and 2 different filaments.

The designer has replied

@anony_rain

what printers, nozzles, and filament settings are you using? I’ve only used the X1 with the .4 nozzle.

@ThePrintingLab

same 0.4 nozzle with x1c used your print profile and tried an old filament then a new filament from an alternative brand. something with the supports failed just on the back but otherwise it was looking amazing everywhere else. I may try again drawing my own supports.

@anony_rain

Replying to @ThePrintingLab :

Was it bed adhesion issues with the supports?