DBap

cover

The Hammer 2.jpg

The Hammer

plate_1.png

Handle

plate_2.png

Head

plate_3.png

2025-03-01_9c636aa388cfd.jpg

0.28mm layer, 2 walls, 15% infill

Head (New)

New head.jpg

I uploaded the original 3 months ago not expecting many downloads, but it has exceeded my expectations, so I decided to upload a revision. &nbsp;I used MeshMixer to clean it up and smoothen the edges and sharpen it up. Please note the print orientation for both parts to get the best print. You may need to do a little sanding to get the parts to fit together and the hole in the handle will get covered by the support material, so you will need to pop it open with a blade, but this should be easy.&nbsp;Lastly, I recommend a 0.08mm layer height but that&#39;s optional.

0.08mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Both AMS and Non-AMS versions included. Please note, you will have to do a little sanding to get the handle into the head then use super glue.&nbsp;You can adjust the size and infill to your liking but build plate orientation matters for a clean print. Use tree supports.&nbsp;

ASIA

Print Profile(2)

Description

Comment & Rating (16)

License

Related Models