rail compatible with "LEGO DUPLO"
Copyright Claim
rail compatible with "LEGO DUPLO"
Boost
8
36
6
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Open in Bambu Studio
Boost
8
36
6
1
42
49
Released
Description
Printed from PLA on a Bambulab X1C printer. I recommend printing 0.2 layer. All supports
EDIT: Based on your noticecorrection of the model geometry error at the beginning of the track, which caused the brittleness of the guide track. Added rounding of track ends.
Comment & Rating (6)
All
Hi Dany,
I downloaded the model to check your fix, but I still have the error at beginning of the track and moreover, no rounding at track end. See screenshot attached. You might want to check your upload?
And I have one more idea for improvement, which will make your model really perfect: On the original rails of the current generation, the hole is not circular, but has been stretched in length. This allows the children to connect the rails at a slight angle. Not sure how to describe better - check screenshot 2.
The designer has replied
0
Reply
Hi
The raw data was corrected but the print profile was not corrected. I'm going to update.
Your idea is interesting. I'll try to look into it over the weekend. I believe I won't forget. Thank you
1
Reply
Replying to @DANY112SVK
Did you had a chance to look at it already? Otherwise I can also try on my own if you decide to share model fils (e.g., f3d).
0
Reply
Replying to @user_2196757751
Hi
I modified it and also tested it but it wasn't quite that good due to different brands of filaments. I tried 3 different brands of PLA. Since each manufacturer has its own PLA, it seems that they differ in "density" and the PLA with the lowest density was already too loose and falling out. So with this I decided that I will not make any changes because it will no longer be universal. If someone wants it more freely, they need to adjust the print settings or make a cut directly in the slicer.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice, print with lego Duplo desk fit very well. The print has gaps and voids on the original tracks
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld