BookMark_Pig_Hueforge
Print Profile(1)
Description
This piglet bookmark design combines elements of cuteness and playfulness, aiming to bring warmth and joy to every reader. The piglet, adorned with delicate flowers and intricate clothing, exudes a sense of innocence and charm, creating a visually delightful experience. The intention behind this creation is to break away from traditional bookmark designs by offering a character full of personality and vibrancy.
Boost Me (for free)
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 72x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with Jade White
At layer #17 (0.84mm) swap to Ash Gray
At layer #24 (1.12mm) swap to Charcoal
At layer #31 (1.4mm) swap to Scarlet Red
At layer #38 (1.68mm) swap to Yellow
At layer #43 (1.88mm) swap to Jade White for the rest.
If you are interested in my work and want to learn more about me and my creations, follow me here: https://linktr.ee/Terry.creation.
I’d greatly appreciate your support on Buy Me a Coffee: https://ko-fi.com/terrycreation.
For commercial licenses, visit: https://patreon.com/TerryCreation.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)