Triumph Speedmaster under seat box V2

An under seat electronics/cable stow junction box i made for my 2024 Speedmaster. This V2 is slightly larger than the original. Please do boost me and if you print, install and find this one of the most usefull things ever under the sun… well i figured i would try the buy me a coffee link :D but seriously all your boosts will do as well ;)   anyway, ride safe out there!   only think not in the images, please put a few small strips of very thin padded tape between the box and the bike tube frame. https://buymeacoffee.com/t.schafer   one more thing as ever observent Jesus pointed out :D i have a little ribbon tied onto the loop to release the seat as you cant reach it with the box in place so figure that one out for yourself…  or just use the right hand side box version :)  take care!     EDIT: was designing a little extra bit as a button on the right side to push to unlock seat and then realized that all i had to do was let the existing pull for the seat loose from the three little tabs and then it just naturally locates itself to right behind the left side box, i have added a couple pictures of this for reference. EDIT2: please note that i have added a smaller set of boxes for those that done need or like the extended version but it is not printed and tested from the original, if you do print/test it please let me know if any issues :)