Vase
Copyright Claim
Vase
Boost
335
616
241
Print Profile(3)
![[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill](https://makerworld.bblmw.com/makerworld/model/UScc804ab30d42a3/60880742/instance/2023-12-31_bd69db1d6bd53.jpg?x-oss-process=image/resize,w_100/format,webp)
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
1.5 h
1 plate
0.16mm layer, 1 walls, 15% infill
5.8 h
1 plate
100mm, 0.2mm layer, 1 walls, 0% infill
59 min
1 plate
Open in Bambu Studio
Boost
335
616
241
38
2.2 k
1.9 k
Released
Description
Vase :)
Comment & Rating (241)
All
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
even holds water
The designer has replied
1
Reply
That actually shocks me - it doesn't seep through the sharp angled points?!
0
Reply
Replying to @moonrakerone
nope. works like a charm
(Edited)1
Reply
mine does to
0
Reply
it's beautiful. this is with Lego Flowers.
1
Reply
forgot to say, we used BL PLA MATTE DARK BLUE. We also thoroughly enjoyed the robotic midi music while it printed. that was a pleasant surprise
0
Reply
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
The design is impressive, but it may be too fragile with just one wall. Strengthening it with two walls and increasing the thickness to 3mm would significantly improve its durability.
The designer has replied
0
Reply
That's what vase mode means.
One continuous line drawn.
It must be one wall, or it's not vase mode.
(Edited)
1
Reply
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
printed beautifully both in smooth and fuzzy.
The designer has replied
0
Reply
I didn't know fuzzy could be mixed with vase. neat!
0
Reply
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
:)
1
Reply
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
Es un buen diseño, más grande de lo que pensaba, y más fino de lo que debería. pero está genial. Graciaaaas!!
(Edited)
1
Reply
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
worket amazing cant wait to get home and see it up close
0
Reply
Boosted
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
Looks nice, even with the basic PETG.
Unfortunately my print does not keep the water. 😂
0
Reply
Print Profile
100mm, 0.2mm layer, 1 walls, 0% infill
evet completed 100% , the vase is half...
0
Reply
Print Profile
[Vase Mode (Means 1 Wall)]: 0.2mm layer, 1 walls, 0% infill
good design but I would prefer it a little taller and not in vase mode I ended up just printing a second that I made taller and turned off vase mode
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld