The Condiment Cannon

Want to build your own Condiment Cannon? Now you can! This is the complete CAD file and a Bambu printer plate .3MF file with all the individual parts laid out by material for easy printing. The materials used were PLA+ and TPU, though for the motor mount, I recommend the strongest filament your printer can manage. I opted to make a version of the motor mount out of aluminum, but it's not strictly necessary!  

Full List of Materials:

Electronics:
    -[ESP32 S3 Zero] (https://a.co/d/iYM72cp)
    -Flipsky FSESC 4.20 Plus (https://a.co/d/79ByOJG)
    -6374 170KV 2800W Brushless Motors (https://a.co/d/ezgLhVo)
    -12V 35mm Stroke Solenoid (https://a.co/d/ix5HPL5)
    -Optocoupler MOSFET Controller (https://a.co/d/ddfAqcd)
    -2x 24v LiPo Batteries (https://a.co/d/inZyjrR)
    -12v LiPo Battery (https://a.co/d/7NJA1Hf)
    -1.54in I2C OLED(https://a.co/d/5i2vpgr)
    -12mm Momentary Buttons (https://a.co/d/9QR4dXc)
    -19mm On/Off Switch (https://a.co/d/6V2EFEX)
    -19mm 3 Position Dial (https://a.co/d/11VGRnp)
    -2x 25mm Fans (https://a.co/d/eRRSVJW)
    -4mm Banana Plugs (https://a.co/d/05EiQNE)
    -XH2.54mm Female Headers (https://a.co/d/7EqLdhv)
    -Micro Switch w/ Wheel (https://a.co/d/eD5y7w1)

Frame:
    -2x 500mm 15mm Rods(https://a.co/d/htkxwWS)
    -1/4" Aluminum Motor Mount Plate
    -10mm Shaft Collar (https://a.co/d/05EiQNE)
    -[1/2" x 1/16" Neoprene Rubber Strip](https://a.co/d/54fup89)

    -M2 - M8 Bolts 

Accessories:
    -16 Slot Picatinny Rail (https://a.co/d/dpKZg23)
    -17 Slot Picatinny Rail (https://a.co/d/6EeKaIU)
    -10x Scope (https://a.co/d/gqIsZwz)
    -Rail Mount Bipod (https://a.co/d/aweyiJQ)

Misc:
    -Smuckers 1/2oz Jelly Cups (https://a.co/d/eGVRrUN)
    -5mm Ball Bearings (https://a.co/d/94oW1QJ)

Paint:
    -Rustoleum Semi-Gloss Red
    -Rustoleum Semi-Gloss Black
    -Rustoleum Gloss Yellow

Filament:
    -ESUN PLA+ Black (https://a.co/d/bjdDbz5)
    -ESUN TPU (https://a.co/d/6dUmwN8)