A cool spiderman hueforge 200/200

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Black Transmission Distance: 0.3
Gray Transmission Distance: 2.5
Lava Red Transmission Distance: 1
Yellow Transmission Distance: 12

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Lava Red
At layer #18 (1.52mm) swap to Partly Sunny Yellow for the rest.

( you can change the colors)

thanks for reading ;)

good print to everyone ;-)