If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Blue Gray Transmission Distance: 3.2
PLA Generic Skin Tone Transmission Distance: 9.6
PLA BambuLab White Transmission Distance: 9.6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Skin Tone
At layer #18 (1.52mm) swap to White for the rest.