Mouse bungee v2 - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Challapenjo

Household>Office

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

4.8(174)

Mouse Cable Stand STRONGER VERSION

4.1 h

1 plate

4.8(6)

Open in Bambu Studio

Boost

499

1105

210

108

3.2 k

2.1 k

Released

Description

The basic idea of this mouse bungee is great (good job mattiameneguolo), but the design has some weaknesses. I decided to fix the flaws I found and uploaded a remix of the model. You still need to glue the top part to the main base.
Enjoy!

I changed:

base:
redesigned from scratch (the original mesh was a disaster, every wall is slightly angled and the mesh is a complete mess so I modeled a new one)
- height changed so that tabletops < 2.5cm also work
- improved the cable channel on the back so that the cable really stays inside
- removed small support triangle and its mount -> instead angled support with 2 surfaces
- width of the stand mount increased so that it fits better
- vertical plate made slightly thicker
- plate rounded at the top for aesthetics
- new recommendation for print orientation: thread must face vertically, but top with support structure (not visible when installed anyway)
- changed the thread

screw:
- holding grip looks fancy but destroys your hand with these sharp pointy tips -> changed it to a hexagon head screw
- changed the thread

-made longer

stand:
- angle increased from 45° to 90° for better printability without support

Comment & Rating (210)

@eddygohjj

Print Profile

0.2mm layer, 2 walls, 15% infill

Print came out great with no issues. Works fine with no major flaws. Gluing the spring to the base was easy and straightforward

@IPrintStuff2025

Print Profile

0.2mm layer, 2 walls, 15% infill

broke out of nowhere I loved it though worked great.

@Skunkstank

Try orienting this part sideways before printing for better strength.

@CxnstantVFX

Print Profile

0.2mm layer, 2 walls, 15% infill

works well, think it needs glue for assembling tho

@memfis01

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed everything out of PLA, fits very well even on a 39mm desk. Good design, thank you.

The profile uploader has replied

@Challapenjo

Didn't see your first question, sorry mate! But I'm glad it worked out for you and thank you for the positive feedback :)

@_bymatth

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect, it works like a charm without any modification on the profile.

@Math701s

Print Profile

0.2mm layer, 2 walls, 15% infill

printed well and helps tidy up my desk, amazing!

@ilBigo

Print Profile

0.2mm layer, 2 walls, 15% infill

carino!

@TomTomazack

Print Profile

0.2mm layer, 2 walls, 15% infill

I love it, made my Xtrfy M4 RGB feel like an actual wireless mouse. I chopped it up and reduced overall size by a significant margin to better accommodate my particular table, the square tubing is 20 mm thick so the original design was way too big.