Pocahontas

----------------------------

My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. A commercial license to sell my Makerworld AND exclusive designs on Patreon can be found at https://www.patreon.com/busykikibee

----------------------------

This Pocahontas print is available in two sizes – as a 50x150mm bookmark and a 100x200mm (4"x8") desktop hueforge panel. There are two 3mf print profiles available: one contains 3 plates (1 bookmark on a plate, 1 panel on a plate, and both bookmark and panel together on one plate). The other 3mf is A1 Mini compatible with just the bookmark on the plate. The pictured desktop frame is sized perfectly for a 100x200mm panel and was designed by Canadian Gamer. It can be found here. 

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies of my Makerworld Designs is available. 

I also post exclusive designs on my Patreon. A commercial license to sell BOTH my Makerworld and Patreon files can be found here: https://www.patreon.com/busykikibee

----------------------------

All photos you see are of actual prints of my design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Project: Pocahontas
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

8 Unique Filaments Used:
PLA BambuLab Basic Black 
PLA BambuLab Matte Dark Blue
PLA BambuLab Matte Dark Red 
PLA BambuLab Basic Turquoise Blue
PLA BambuLab Matte Ice Blue 
PLA BambuLab Matte Mandarin Orange 
PLA BambuLab Basic Sunflower Yellow
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At 0.8mm swap to Dark Blue
At 0.96mm swap to Dark Red
At 1.12mm swap to Turquoise Blue
At 1.36mm swap to Ice Blue
At 1.52mm swap to Mandarin Orange
At 1.84mm swap to Sunflower Yellow
At 2mm swap to Ivory White for the rest.
 

All photos you see are of the actual print. Using the same filament choices will give the same result. 3mf file is AMS ready to slice and print with height range modifier and layers prepared for you. If using the STL to print the file, apply color swaps by their mm height and use height modifications and infill instructions as per the directions provided. You can safely ignore any error message about floating regions. You do NOT need a prime tower if you are printing with the STL file. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Pictured frame, stand, or puzzle box are by @CanadianGamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330