Multi-Part 1/72 Scale Tiger I Tank (Fusion 360)

Remix Info:

I assembled the model virtually and created connectors to connect all the pieces together. I also added the german cross on its turret. Additionally, I increased the height of the turret brushing by 2.5mm as it would be too low when fully seated.

Summary:

A Panzerkampfwagen VI “Tiger I” tank model printable in parts that press-fit together.

Model Description:

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily.

Printing Information:

• All parts can print regularly except the german cross which requires a filament swap (it is too small on its own)
• Use regular adjusted support for all the pieces except the front hull and the front turret that can benefit from arborescent tree supports.
• Print all the pieces on a flat face or their connector
• Use a brim around the small pieces to increase their stability

Note that I preferred to keep the gun movement so I didn't add a connector to it, you might need a bit of glue if it is too loose but it should hold as designed by the base author.