Universal socket, versatile base

Hello everyone,

here I have crafted a base for a traveling trophy.

By chance, I acquired a bowling pin and spontaneously decided to make a traveling trophy for our small bowling team.

The pin already had a bore on the underside, so I only needed a threaded insert to secure the whole thing.

The dimensions are 160 x 160 x 70 mm; I was able to print it on the A1 Mini without any problems.

The hole in the middle has a diameter of 10 mm,

the recess on the underside has a diameter of 30 mm and is 10 mm deep.

Small plaques of the winners will then be glued onto the eight corners; the plaques will be 60 x 30 mm in size.

For the fastening, I used an M8 x 80 mm hexagon screw, a spring washer, and a flat washer.

Perhaps someone can use it or bring joy to someone else. ;)

I forgot the supports during the print; therefore, the underside does not look optimal.

I noticed it too late… but it still works.