Summary

This funnel is designed to prevent the grinded coffee to spill over during the grinding process.

Lock the funnel in place, insert the assembly in the grinder and grind !
You can remove the assembly from the grinder, and conveniently tamper in place.
When all is set you can unlock the funnel from the portafilter and make your coffee.

This is designed for 54mm filters and for the built-in grinder from Sage Barista coffee machine.
I can adapt the design upon asking.

Please keep this in mind : This is an item to be used in contact with food, you have to take the appropriate precautions in order to avoid plastic/chemicals contamination.

All other characteristics are shown on the attached drawing.

You can download the design with my logo on it which I find to be a fun addition.
However, you can download the same design without the logo if you prefer a less apealing look.

Any question or custom design can be ask in DMs.

Have a great day and keep printing

Print Settings

Printer:

BambuLab P1P

                                            Rafts:                      
Doesn't Matter

Supports:

Yes

                                            Resolution:                      
0.2

Infill:

100%

                Filament:                                     Doesn't Matter PETG or ABS                                    Doesn't Matter                    
                        Notes:                     This has to be printed with strong filament has a lot of stress is put in the locking branches. (risk of layer rip).

I recommend to use either food grade filament with a dedicated printer or cover your print with food contact varnish in order to avoid contamination.

coffee

coffeegrinder

coffeemachine

Comment & Rating (1)

@user_3181087894

Does not fit well on my portafilter. My IMS basket is too wide and my bottomless portafilter has different hooks. Be aware this is very tight fit to standard accessories.

No more