X1C AMS Hub Guide (release)
Copyright Claim
X1C AMS Hub Guide (release)
Boost
41
80
19
Print Profile(2)
(PLA) 0.2mm layer, 4 walls, 15% infill
Designer
12 min
1 plate
(ABS) 0.2mm layer, 4 walls, 15% infill
Designer
12 min
1 plate
Open in Bambu Studio
Boost
41
80
19
1
125
78
Released
Description
Another of many PTFE guides for the X1C and the AMS. This one is a release button for the AMS hub.
The AMS hub has smaller holes than the AMS buffer; so it requires different release buttons.
You can find other models I have released for the X1C/AMS here:
https://makerworld.com/en/u/2811301167/collections/109412
If you appreciate my models, please consider buying me a coffee!
Comment & Rating (19)
All
Print Profile
(ABS) 0.2mm layer, 4 walls, 15% infill
Worked very well. Printed in Lavender ABS. I should have read the comment about the magnets/springs first hahaha
(Edited)
0
Reply
Print Profile
(ABS) 0.2mm layer, 4 walls, 15% infill
Printed with eSun ABS+ white. Seems ok. Only seems bigger for the rightmost of the hub. No issue when testing with the tubes that came with the hub...SUCCESS!
0
Reply
Print Profile
(ABS) 0.2mm layer, 4 walls, 15% infill
0
Reply
Print Profile
(PLA) 0.2mm layer, 4 walls, 15% infill
nice parts…… only take care to disassemble the hub to avoid the magnets jumping out
0
Reply
Hahaha I should have read this comment first.
0
Reply
Print Profile
(PLA) 0.2mm layer, 4 walls, 15% infill
oadt perfekt danke für dein druckprofil
0
Reply
Print Profile
(PLA) 0.2mm layer, 4 walls, 15% infill
schneller Druck und passt 👍🏻
0
Reply
Print Profile
(PLA) 0.2mm layer, 4 walls, 15% infill
Funktionieren super.
0
Reply
Print Profile
(PLA) 0.2mm layer, 4 walls, 15% infill
Simple but effective.
0
Reply
Print Profile
(PLA) 0.2mm layer, 4 walls, 15% infill
perfect
0
Reply
Print Profile
(PLA) 0.2mm layer, 4 walls, 15% infill
Printed great with Bambu PLA Basic
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld