Search models, users, collections, and posts
Printer Torture Test
IP Report
Print Profile(8)
0.2mm layer, 2 walls, 10% infill
Designer
58 min
1 plate
Torture Test that works with the A1 Mini!
Designer
1.3 h
1 plate
0.2mm Slicer default setting
1.2 h
1 plate
0.08mm Slicer default setting
2.3 h
1 plate
Click to see more
Open in Bambu Studio
Boost
656
1610
479
109
6.3 k
3.9 k
Released
Description
Summary
If you enjoy my design, please go ahead and like it, as it helps other people find it!
This is my custom 3D printer torture test.
Retraction Test
Bridging Test
Cooling Test
Flow Test
Dimensional Accuracy Test:
Use Calipers to measure the cube, dimensions should be 20 x 20
Holes should fit filament through, as the holes are 1.8 mm in diameter
Surfacing Test
Belt Tension Test
Line Width Test
First Layer - The bottom right has three different layers. Use a calipers to measure the three heights 0.6, 0.4, and 0.2. Take the proposed and the actual height to help you calibrate your Z height.
Overhang Test
The entire model is 100 mm by 50 mm
If you print this, please upload a picture under makes. I would like to see how it works for you.
Thanks!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (479)