LTT Magnetic Screwdriver Holder

• Parts
  • 32 mm OD neodymium round magnet (with center hole)
  • M3x4x4.2 brass nut insert
  • M3x6 flat head screw
• Comments
  • 0.2 mm layer height, 3 perimeter shells, 3 top and bottom layers, 20% infill
  • Paint on supports may be required for the overhang of the hole for the magnet
  • 
• Fusion 360 File: https://a360.co/3WwBms1

LTT Magnetic Bit Holder

• Parts
  • 60x10x3 mm neodymium bar magnets
    • These are the nominal dimensions of the product I ordered. Actual dimensions were 58 x 9.5 x 2.75 mm and the slot as been designed to work with actual dimensions. Send me a note if your dimensions are different.
    • 5 are required for 32 bit holder
• Comments
  • Bed needs to be at least 220x220 for largest 32 bit holder
  • 32 bit holder with text for Metrix Hex, Torx, and Imperial Hex bit sets. Note that the LTT hex bit sets come with 4 duplicate bits (total), that is why it is 32 bit and not 36 bit.
  • No supports, 0.2mm layer height for legible text, 3 perimeter shells, 3 top and bottom layers, 20% infill
  • Print Diagonally as shown, with slot for magnet at top.
  • 
• Fusion 360 File: https://a360.co/3YRpkLr