Wallace and Gromit Sliding Puzzle

This is a 3x3 sliding tile puzzle featuring an image of Wallace and Gromit. Solve the puzzle to reveal Nick Park's greatest creations.

It prints in under an hour and a half and makes a nice present for W&G fans or party bag gift for children.

Print instructions:

• There are print profiles for a two colour print (i.e. black and white) or a four colour print. 
• The four colour print generates less than 4g of flushed waste.
• The four colours comprise the base colour of your choice, plus black, white, and brown. 
• It can also be printed as a five or six colour print. Each part can be separately coloured (not painted) in Bambu Studio, and most elements are clearly labelled with their intended colour. If you choose to print it using five or six colours with one AMS you will have to be attentive and change the filaments several times.
• I recommend using matte colours for the lighter tones.
• If you change the colours, the “Frame” and “Squares” parts should be the same colour to avoid excessive purge waste. 
• Print the puzzle face down on a clean bed for best results.
• Check that you have matched the bed type (i.e. smooth PEI or textured PEI) to that installed on your printer before starting your print.
• Parts may stick slightly during printing and need to be separated. This should not be a significant issue.

If you like this model, please check out my other designs.