Stormtrooper (Filament Painting)
Stormtrooper (Filament Painting)
Print Profile(2)
Description
Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required
4 Color HueForge model. Stormtrooper filament painting made using Sunlu PLA+ colours.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Sunlu PLA+ Grey Transmission Distance: 2
PLA Sunlu PLA+ Silver Transmission Distance: 2
PLA Sunlu PLA+ White Transmission Distance: 8
Swap Instructions:
Black until layer #6 at 0.56mm
Grey until layer #8 at 0.72mm
Silver until layer #9 at 0.8mm
White for the rest.
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results. SUNLU filaments tend to be more transmissive and are a good choice.
Use the exact numbers in your slicer to match up properly.
model can be resized but keep the ‘Z’ height the same, designed to print with 0.4 nozzle
Comment & Rating (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
