Wind chime

Enhance your indoor or outdoor space with this beautifully designed 3D-printed wind chime. Its minimalist white look fits seamlessly into any modern décor, while printing in wood-like filament adds a natural, rustic touch. Prefer something more vibrant? Choose bold, lively colors or multicolor to brighten up your day!

This wind chime is perfect for any setting—whether hanging on a patio, in a garden, or inside your home. For indoor use, print it in PLA, and for outdoor durability, opt for PETG.

A simple yet elegant decoration that adapts to every style—print yours today and please share pictures of your creativity! 🎶

Assembly Instructions: 3D-Printed Wind Chime

Materials Needed:

• Rope
• 4 self-tapping screws 2.6x8mm ( or another screw that is more or less the same size)

Step 1:

Thread the ropes through the three tubes and tie a thick knot at the bottom to secure them (see photo 1).

Step 2:

Take the three ropes that stick out from the top of the tubes and attach them to the central piece by tying knots (see photo 2).

Step 3:

Secure the central piece to the largest roof by inserting the threaded rod through the hole in the roof and fastening it with a screw (see photos 3 and 4).

Step 4:

Tie a thick knot at each rope end as shown in photo 5. Then, tie these together into one large knot as seen in photo 6. Push the thick knot through the small roof piece (see photo 7).

Step 5:

Place the small roof on top of the large roof and secure both by fastening them with the four screws (see photo 8)